KIWIFOTOS KWC-01 Wireless Charger For Selected Smartphones
| Brand: | JJC |
| Product Code: | JJC Kiwifoto KWC-01 Black Wireless Charger |
| Availability: | 9 |
Qty:
- OR -
Add to Compare
KIWIFOTOS KWC-01 Wireless Charger fits Iphone8, Iphone X, Galaxy S8, Galaxy Note8 and other Qi-enabled devices or those devices with wireless charging function. It can enable your smart phone with faster charging speed without any wires. Made of premium material, this charger can provide your smart phone with multiple protections: overcharge protection, overheat protection, overcurrent protection and short circuit protection. Thus, you can use it with trust and confidence. The soft LED indicator light can display the charging status of your phone. LED shows blue when charging and green* when charging is complete.The non-slip pads on the bottom can effectively prevent your phone from accidental slipping. Besides that, the heat dissipating holes can dissipate the heat in time for better protecting your devices. With this wireless charger, charging will become more safe, quick and convenient.
KWC-01
Input: 5V/2A, 9V/1.67A
Output: 5V/1A, 9V/1A
Standard: Qi
Attention
1.Note*: The indicator light change from blue to green only suits for those in-built Qi-enabled devices with software which supports signal output when charging is complete.
2.When you use this product, please make sure the current of your adapter is 5V/2A or the adapter has fast charging function with high quality.
3.Charging Mode
There are 2 charging modes: standard charging mode and fast charging mode.
If you use 5V/2A (USB) adapter, the charger will enter standard charging mode.
If you use QC 3.0 adapter, and your device supports wireless charging function at the same time, the charger will enter fast charging mode automatically.
4.Please connect to appropriate power and put your phone in the center of the charger.
5.DO NOT expose the product to water, fire or overheated (>113 °F) and lower (<-4 °F) temperature environment.
6.The effective transmission distance of this charger is less than 8mm. If your device has protective case, please keep the case thickness within 5mm to make sure the charger works normally.
KWC-01
Input: 5V/2A, 9V/1.67A
Output: 5V/1A, 9V/1A
Standard: Qi
Attention
1.Note*: The indicator light change from blue to green only suits for those in-built Qi-enabled devices with software which supports signal output when charging is complete.
2.When you use this product, please make sure the current of your adapter is 5V/2A or the adapter has fast charging function with high quality.
3.Charging Mode
There are 2 charging modes: standard charging mode and fast charging mode.
If you use 5V/2A (USB) adapter, the charger will enter standard charging mode.
If you use QC 3.0 adapter, and your device supports wireless charging function at the same time, the charger will enter fast charging mode automatically.
4.Please connect to appropriate power and put your phone in the center of the charger.
5.DO NOT expose the product to water, fire or overheated (>113 °F) and lower (<-4 °F) temperature environment.
6.The effective transmission distance of this charger is less than 8mm. If your device has protective case, please keep the case thickness within 5mm to make sure the charger works normally.
