K50 Quick release Plate and base Arca swiss style
| Product Code: | K50 Quick release Plate and base Arca sdy AX |
| Availability: | 6 |
Qty:
- OR -
Add to Compare
K50 Quick release Plate and base Arca Swiss style
3rd party K50 Quick release Plate and base Not oem (not made by Arca Swiss)
K50 quick assembly
Standard: fast loading dock + quick release plate
Dimensions: 50mm * 70mm * 25mm
Quick Release Plate Size: 50mm * 50mm * 9mm
Material: aluminum alloy material
Net weight: 120g
bottom thread is 3/4 inch tripod thread with 1/4 inch thread adapter
Product Features
The quick set can be mounted on the stabilizer, when you first adjust the balance stabilizer settings, install
Remove the camera just use this quick set, no longer need to repeat adjusted. Could buy a few more rapid in three
Switching between tripod, stabilizers, slide, etc..
Common to a variety of digital cameras
Commitment to quality: product quality problems are unconditional return
1 material: use of high-quality aluminum alloy, light weight and high strength.
2 Processing: CNC machining using one piece, delicate appearance, its edges rounded arc after treatment, ergonomically designed to ensure the safety of use.
Surface treatment: After a hard-anodized, corrosion resistance, wear resistance, and smooth appearance.
4 Compatibility: using internationally accepted standard design sizes, compatible with many of the current international camera clamp base (Compatible with most Beike, QZSD, Benro, ACRA, KIRK, WIMBERLEY, RRS, etc.)
5 Camera screw: Each quick release plate cameras are equipped with a full brass screws, using a hand-tightened and coins tighten two ways.
6 rubber pad: 12mm wide grid using four rubber pads, not only enhances the body's resistance and reduce the possibility of rotation of the body,
And at the bottom of the camera so that it is not easy to damage protection, reasonable board design with its adjustable aperture, so that the adjustment range greatly increased.
Note item may vary slightly from image
3rd party K50 Quick release Plate and base Not oem (not made by Arca Swiss)
K50 quick assembly
Standard: fast loading dock + quick release plate
Dimensions: 50mm * 70mm * 25mm
Quick Release Plate Size: 50mm * 50mm * 9mm
Material: aluminum alloy material
Net weight: 120g
bottom thread is 3/4 inch tripod thread with 1/4 inch thread adapter
Product Features
The quick set can be mounted on the stabilizer, when you first adjust the balance stabilizer settings, install
Remove the camera just use this quick set, no longer need to repeat adjusted. Could buy a few more rapid in three
Switching between tripod, stabilizers, slide, etc..
Common to a variety of digital cameras
Commitment to quality: product quality problems are unconditional return
1 material: use of high-quality aluminum alloy, light weight and high strength.
2 Processing: CNC machining using one piece, delicate appearance, its edges rounded arc after treatment, ergonomically designed to ensure the safety of use.
Surface treatment: After a hard-anodized, corrosion resistance, wear resistance, and smooth appearance.
4 Compatibility: using internationally accepted standard design sizes, compatible with many of the current international camera clamp base (Compatible with most Beike, QZSD, Benro, ACRA, KIRK, WIMBERLEY, RRS, etc.)
5 Camera screw: Each quick release plate cameras are equipped with a full brass screws, using a hand-tightened and coins tighten two ways.
6 rubber pad: 12mm wide grid using four rubber pads, not only enhances the body's resistance and reduce the possibility of rotation of the body,
And at the bottom of the camera so that it is not easy to damage protection, reasonable board design with its adjustable aperture, so that the adjustment range greatly increased.
Note item may vary slightly from image
